00420581207551
Language: CZENDEFRSK
STRAPPING TOOLS, DECOILERS
Právě se nacházíte: PRODUCTS / STRAPPING TOOLS, DECOILERS

Strapping tools

Manual strapping tool for OCL1 steel foil
Used for strapping with a 13, 16 a 20 mm wide steel tape. The joint is made with a slash in 3 positions. Operation consists of wrapping the strapped product, inserting the strap into the strapping tool and stretching it. Then the joint is pressed through with one action and at the same time the excess tape gets cut off, i.e. there is no need for another tool to finish the strapping.
Advantages:
  • made from steel and aluminium alloy without plastic parts
  • no plastic covers = high mechanical resistance
  • plunger space is better protected against dust than any competition strapping tool
  • tensioning mechanism has no latches (source of faults)
  • bigger tension wheel (one shift of tension lever moves a Langer piece of tape)
  • tightens perfectly and does not tend to break the tape = possible to use less strength for this operation
  • soft spring of the tensioning mechanism = does not strain fingers
  • only one spring as oppose to four sprint of the competition strapping tools (source of faults)
  • connecting rod is not on the eccentric rod = longer lifespan
  • robust design of the entire strapping tool = greater toughness and overall longer lifespan
  • steel tape with strength up to 950 N/ mm2 can be used
  • overall smaller number of parts compare to the competition strapping tools = smaller



Manual strapping tool for BO51 steel tape 
BO-51 strapping tool is suitable for strapping goods with steel tape without the use of a buckle. The joint is made with slashes of tapes (strength of the joint up to 8 000N ). BO-51 is specifically designed for strapping items with one flat surface such as boxes, brick and timber products, goods on pallets etc. This strapping tool is adjustable for tapes 13 to 20mm wide and 0.4 to 0.6mm thick.
Steel tape manual BO6 strapping tool
BO-6 strapping tool is an innovated type of the BO-51 strapping tool. It is 0.75kg lighter, it is easier to handle and better ergonomics of levers allows easier strapping even vertically. Modern design of this strapping tool significantly improves its lifespan. Technical parameters are consistent with the BO-51 type.
Pneumatic BO6PN strapping toll 
Manual buckle free strapping tool for steel tapes with pneumatic tensioning. It is specifically designed for business with medium to high capacity of strapping. This strapping tool is adjustable for tapes 13 to 20mm wide and 0.4 to 0.6mm thick. The strapping tool has a longer lifespan; its standard version is equipped with an extra strong tensioning wheel, steel cover and a handle for hanging on the balancer.
Fp_inca pneumatic strapping tool
Suitable for strapping pallets and heavier items with flat surface for strapping. The joint is made with tape slashes – buckle free. It is suitable for businesses with medium to high capacity of strapping. The strapping tool is compatible with tapes and buckles 13, 16 or 19mm wide according to the modification.
As an alternative method to strapping, especially for tapes 25 and 32 mm wide, buckles are used with the result on pic. steel strapping with a buckle.
RM-E strapping tool
It is designed for strapping round or irregularly shaped items with a steel tape with “R” type buckle. These strapping tools are adjustable for tapes 13, 16, 20mm wide and 0.4 to 0.6mm thick.
Strapping set of NP-2 (tensioner) + UK-2 (closing pliers) for strapping with a steel tape 32 x 1mm with a buckle
This set serves for strapping very heavy items such as ingots, wood piles etc. The set allows strapping items with a circular profile with the tension of joints up to 15 000N. Similar set NP-1 + UK 1 is also delivered for tapes 13, 16 or 19mm wide.
Fp16 pneumatic strapping tool with a buckle 
Strapping tool for binding round or irregularly shaped items with a steel tape. The joint is made with a steel buckle and one slash. The strapping tool operates with tapes and buckles 13, 16 or 19mm wide according to the modification.
Fp32s pneumatic strapping tool with a buckle
The strapping tool is suitable for binding round and irregularly shaped items with a steel tape. The joint is made with a steel buckle and two slashes. The tool operates with tapes and buckles 19, 25 or 32mm wide according to the modification. Tightening force is 7000N and the joint up to 15000N strong. The tool is equipped with pneumatic opening and closing of the strapping slot.
10-15mm PP tapes strapping tools
is suitable mainly for strapping pallets with PP tapes 12 and 15(16)mm wide with a so called pressed buckle.

H21 tensioner for PP and PES tapes

is used for strapping pallets, lumber and wherever strapping with a pressed buckle is not sufficient and it is necessary to achieve higher strength. The tool is used together with a “B” type buckle. The strapping process with this tool is depicted on the following figures in sequence. 

     

FROMM P320(P321) is an AKU tool for tensioning and joining plastic strapping tapes. It is a manual cordless strapping tool for binding with polypropylene (PP) tapes or polyester (PET) tapes 0.4 – 1.05 mm thick. With this tool it is possible to strap, for example, palleted goods, cartons, single products, profile bundles etc. It is characterized by reliability, easy operation and high rigidity made by the joint. The main advantage is its mobility due to the acc power of the tightening and friction welding of the tape. The advantage, compare to other acc devices, is its ergonomic operation because levers have well shaped handles and it is operated with only 2 levers moving in the direction of the strapping, which ultimately means that you will be able to operate the tool with one hand. Another advantage is its great strength especially in tensioning the FROMM P321 tape. The tool is suitable for industrial use due to its robust design. The tool is certified by GS, CE and the FROMM company is certified with a ISO 9001. Warranty – after warranty service provided.
WIRES FOR PRESSES MANUFACTURE


VÍCE INFORMACÍ

 
PRODUCTION OF PAPER EDGE PROTECTORS


VÍCE INFORMACÍ

 
BINDING TAPES


VÍCE INFORMACÍ

 
STRAPPING WIRES


VÍCE INFORMACÍ

 
FOILS


VÍCE INFORMACÍ

 
STRAPPING TOOLS, DECOILERS


VÍCE INFORMACÍ

 

KONTAKTY

LOGO_COMET-OBALY

Production of strapping
and packaging materials...

COMET-OBALY_ADRESA  Průmyslová 734/11, 779 00  Olomouc
COMET-OBALY_TELEFON  00420581207551
COMET-OBALY_EMAIL  

KONTAKTNÍ FORMULÁŘ



POSLÍČEK / STĚHOVÁNÍ ZÁBAVOU

CZ

Moving Olomouc, Brno,
Ostrava, Prague...

COMET-OBALY_ADRESA  Průmyslová 734/11, 779 00  Olomouc
COMET-OBALY_TELEFON  +420 724 710 381
COMET-OBALY_EMAIL  

Ochrana osobních údajů (GDPR) - © 2016 / ABSINTDESIGN / GASTRODESIGN